datetime_now =2024-11-24T15:26:13
datetime_class =2024-11-29T00:00:00
datetime_diff =102816000
MBB Consulting™ - Failure Mode and Effects Analysis (FMEA) Training Near Davidson, NC

Failure Mode and Effects Analysis (FMEA) Training Near Davidson, NC

Failure Mode and Effects Analysis (FMEA) Training
Davidson is on the east side of Lake Norman 40 minutes north of Charlotte. FMEA training helps Davidson students avoid risk designing products, or processes.
Price $349 / student
Duration 1 day
Format In-person, instructor-led slideshow with exercises and a quiz to test comprehension.
Materials Each student will receive a 3-ring binder containing print-outs of the slideshow. Assuming satisfactory quiz results graded a few days after class, each student will receive a Certificate of Completion.
Class Size5 - 8 students
Start Day
SUMOTUWETHFRSA
Legend:
unavailable
 available
 facility match
CityDavidson, NC

Recommended Dates

The following dates are recommended because they have a low minimum student requirement, or students are enrolled but not yet enough to hold a class. Please choose a date for your Failure Mode and Effects Analysis (FMEA) Training class. Dates are formatted as year-month-day:


All Dates

If none of the recommended dates work with your schedule, that's ok. Please choose a date from the list below:



About Failure Mode and Effects Analysis (FMEA) Training


Who is Failure Mode and Effects Analysis (FMEA) Training for?

Failure Mode and Effects Analysis training is for anybody interested in launching a new undertaking more successfully. New undertakings can be services, products, or processes. And more successfully means with less risk, injury to customers or employees, warranty cost, rework cost, and scrap cost. In our course, Davidson students learn:

Failure Mode and Effects Analysis (FMEA) Training Course Overview:

FMEA training describes Failure Mode and Effects Analysis so Davidson students can lessen risk while designing any new system, product, or process. FMEA as a Design Tool. Failure Mode and Effects Analysis was born in Aerospace and evolved in Automotive; industries where we can't afford to make mistakes because they're safety-critical and measured in the cost of lives lost. What's useful for designing a zero-failure Space Shuttle is probably useful everywhere. Many industrial leaders agree so FMEA has found applications not only in product design but system design and process design as well. For example, Manufacturing Engineers in Automotive Powertrain divisions may have $50M budgets to launch new machining lines. That's a lot of money; as much as many smaller companies earn in a year. Mistakes can't be made. The expectation is that these new, super-complex lines launch flawlessly. How can that be done? FMEA.

FMEA as a Root Cause Analysis Tool. In Six Sigma's DMAIC Analyze Phase, suppose you're working on a really tough problem with a low defect rate or a one-off that was destroyed in the process of its failure. How can you find the root cause? Many folks give up at this point claiming, "we can't do anything about a one-off failure". Not true. If that were true, FAA investigators wouldn't have jobs. If actual failure modes no longer exist, we can look at potential causes. FMEA allow us to do that.

More Cities

If Davidson won't work for you, don't worry. MBB Consulting™ also offers Failure Mode and Effects Analysis (FMEA) Training in the following recommended cities plus many more:

Try Training in
Houston

Houston, TX

Try Training in
San Antonio

San Antonio, TX

Try Training in
Austin

Austin, TX

Try Training in
Nogales

Nogales, SO

Davidson

Excellent choice!

Davidson
SUMOTUWETHFRSA
Davidson, NC
Credit: NCR

Facility

Davidson Failure Mode and Effects Analysis (FMEA) Training is delivered 10 min north of Davidson just off Langtree Rd., at the intersection of I77.

Maps of Nearby

The following links will open in new tabs so you don't lose your place in the pre-registration process. When you're done checking out all the cool stuff around Mooresville, return here to choose a date for your Failure Mode and Effects Analysis (FMEA) Training class.

Testimonials

Read what our students and clients have to say.

Nick P.
Nick P.
Mechanical Engineer
Machinery

I had extremely limited knowledge of GD&T before this course. I learned a lot in a strong course that allowed room for questions, example, and provided the space to learn the course material to the best of my ability.


Vidal A.
Vidal A.
Commercialization Manager
Food Production

I was familiar with 5S prior to this training, but the course really gave an in-depth understanding of the principles and purpose. It's a lot more than just organizing and cleaning your work area. MBBC Note: Other students from this class described it as "very insightful and educational" delivered by in instructor who was "very knowledgeable about Lean".